Description
- The perfect low light hunting peep sight up to 200 yards.. Best out to 150 yards (not for long distance):
- Made for fast sight acquisition and cloverleaf groups. Use the scope -like reticle and the bright green fiber optics to get on target fast. Pair it with a TruGlo front sight for a three dot pistol setup (TruGlo sights not sold on our site)
- FITS:
- Marlin Pistol Calibers (1894): Marlin 1894 rifles chambered in 357 Mag / 38 Special, 41 Mag, 44 Mag, and 45 Colt.
- Marlin Rifle Calibers & Rossi 95 & Henry Rifle Calibres: All Rossi 95 rifles and Marlin Large Caliber rifles chambered in 45-70 30-30, 35 Rem, 338, 308, 444, 450M, 360, 38-55, and Henry Large Caliber rifles chambered in 45-70 30-30, 360, 38-55
- Rifle Caliber with 1/8″ Riser: As per above (Marlin, Henry and Rossi Rifle Calibres), with an 1/8″ spacer below the sight, to give added elevation.
- Henry Big Boy: Henry lever-action rifles chambered in 357 Mag / 38 Special, 41 Mag, 44 Mag, and 45 Colt.
- FITS: Works with your factory sight OR any replacement front sight (fiber optic or otherwise)
In the Package: one sight base w/windage screw, one aperture spring w/ elevation screw, two mounting screws, one Allen wrench.
CLOVERLEAF RECEIVER PEEP SIGHTS KEY FEATURES:
– Sleek, low profile, snag-free winged base secures the aperture spring against damage and zero loss while presenting an elegant, dare we say sexy, profile.
– Low aperture sight height elevations (from .26″ in the center of the sight up to .36″)
– Clearly marked, scope-like windage and elevation marks make for quick and precise adjustment
– CloverLeaf aperture provides an exceptionally large, .165″, bright target picture while still allowing for scope-like, precise shot placement with bright fiber optics on either side
– One piece aperture spring assembly offers robust, repeatable adjustment, and interchangeability between all bases/rails.
– Matte blasted top sighting channel greatly reduces reflective light interference.
– Type III anodized 7075 billet or lacquered brass bar stock bases look great for a lifetime.
SPECIFICATIONS:
WINDAGE: Side-to-side .09″ (using set screw)
SIGHT HEIGHT (from receiver base to center of peep): .26″ – .36″ works with factory front sights (using set screw)
CLOVERLEAF SPRING: .165″ ghost opening and 2.3″ length tail (rides along the bottom of the base/rail)
SMALL BASES Pistol Calibers: 3.31″ length x .650″ width
LARGE BASES Big Bores: 3.66″ length x .650″ width
What Makes Our Peep Sights Different?
– Traditional receiver mounted rear peep sights are too tall, forcing you to go on a hunt for a suitable front sight when you’d rather be hunting.
– Delicate aperture stems are exposed to rough handling, come loose / unscrewed during use, and are prone to snagging.
– Elevation and windage adjustments use fiddly double set screws that often vibrate loose.
– Blued steel bases rust and lose their luster.
